Effects of Logged and Unlogged Forest Patches on Avifaunal Diversity

In the Hyrcanian forests of northern Iran, reduced-impact silviculture systems, (single-tree and group-tree selection) were applied over a large area, which generated different local habitat structures. The aim of this study was to assess the differences between treated and untreated areas of forest and their effect on avian richness, abundance and diversity (R.A.D). Birds were surveyed during the breeding season in 2009 by 100-point counts, equally distributed in the treated and untreated area. Avian R.A.D was significantly different and higher in the untreated area. Generally, forestry practices cause noticeable changes in canopy percentage, tree composition, snags and shrub number. Treated forest habitats in the area of study had a much more developed understory, fewer snags and fewer large diameter trees. The results highlighted the importance of forest maturity and showed that preventing silvicultural disturbances may not be the best solution for conserving and enhancing biodiversity. Rather, methods such as selective cutting seem an appropriate and sustainable way of forest management. It is suggested that forests should be managed to conserve structural elements which create favorable habitat for bird species, preventing future species losses due to logging practices.     

Epichlorohydrin Crosslinked 2,4-Dihydroxybenzaldehyde Schiff Base Chitosan@SrFe12O19 (EP-DBSB-CS@SrFe12O19) Magnetic Nanocomposite for Efficient Removal of Pb(II) and Cd(II) from Aqueous Solution

Journal of Polymers and the Environment - In this paper, new epichlorohydrin crosslinked 2,4-dihydroxybenzaldehyde Schiff base chitosan@SrFe12O19 magnetic nanocomposite (EP-DBSB-CS@SrFe12O19) was...     

Simultaneous Cr (VI) reduction and diazinon oxidation with organometallic sludge formation under photolysis: kinetics,degradation pathways,and mechanism

Environmental Science and Pollution Research - In this study, simultaneous removal of an organic matter (diazinon, DIZ) and an inorganic substance (chromium, Cr) was used. Breaking down of organic...     

Photo–degradable and recyclable starch/Fe3O4/TiO2 nanocomposites: feasibility of an approach to reduce the recycling labor cost in plastic waste management

Environmental Science and Pollution Research - In this research, a biodegradable starch/Fe3O4/TiO2 bio-nanocomposites (SFT) were produced using different nano Fe3O4/TiO2 (FT) (3, 5, and 10 (wt% dry...     

Degrading a mixture of three textile dyes using photo-assisted electrochemical process with BDD anode and O2–diffusion cathode

In this paper, degradation of a mixture of three azo dyes was studied by the photo-assisted electrochemical process using an O₂-diffusion cathode containing carbon nanotubes and boron-doped diamond (BDD) anode. The concentration of three textile dyes (C.I. Acid Orange 8 (AO8), C.I. Acid Orange 10 (AO10), and C.I. Acid Orange 12 (AO12)) was determined simultaneously despite the severe overlap of their spectra. For this purpose, partial least square (PLS), as a multivariate calibration method, was utilized based on recording UV–Vis spectra during the decolorization process. Moreover, the central composite design was used for the modeling of photo-assisted electrochemical decolorization of the aqueous solutions containing three dyes. The investigated parameters were the initial concentration of three dyes, applied current and reaction time. Analysis of variance (ANOVA) revealed that the obtained regression models match the experimental results well with R (Khataee et al. 2010, Clean-Soil Air Water 38 (1):96–103, 2010) of 0.972, 0.971, and 0.957 for AO8, AO10, and AO12, respectively. Three-dimensional surface and contour plots were applied to describe the relation between experimental conditions and the observed response. The results of TOC analysis confirmed good ability of proposed photo-assisted electrochemical process for degradation and mineralization of textile industry wastewater.     

Report: The assessment of hospital waste management:a case study in Tehran

Hospital waste management is an important process that must be dealt with diligently. The management of hazardous waste material requires specific knowledge and regulations and it must be carried out by specialists in the field. In this cross-sectional study, we assessed the main stages of hospital waste management including separation, containment, removal and disposal of waste materials in public hospitals affiliated with Tehran University of Medical Sciences (TUMS). We selected 108 units of six hospitals (three general hospitals and three subspecialty hospitals) from those hospitals supervised by TUMS using the cluster sampling method. The measurement was conducted through a questionnaire and direct observation by researchers. Association analysis was done by statistical tests; Fisher exact test and chi-squared using SPSS software. According to the results obtained by the questionnaire, most of the studied wards scored moderately in terms of quality of their performance in all stages of waste management. About one-fifth of the wards were suffering from poor management of their medical waste and only a minority of wards obtained good scores for managing their waste materials. The findings also revealed significant associations between temporary waste storage and collection and the level of education of the managers (P = 0.040, P = 0.050, respectively). In summary, the study indicated a moderate management in all processes of separation, collection, containment, removal and disposal of waste materials in hospitals with several observed problems in the process.     

Modelling of BP Texas City refinery accident using dynamic risk assessment approach

Process industries involve handling of hazardous substances which on release may potentially cause catastrophic consequences in terms of assets lost, human fatalities or injuries and loss of public confidence of the company. In spite of using endless end-of-the-pipe safety systems, tragic accidents such as BP Texas City refinery still occur. One of the main reasons of such rare but catastrophic events is lack of effective monitoring and modelling approaches that provide early warnings and help to prevent such event. To develop a predictive model one has to rely on past occurrence data, as such events are rare, enough data are usually not available to better understand and model such behavior. In such situations, it is advisable to use near misses and incident data to predict system performance and estimate accident likelihood. This paper is an attempt to demonstrate testing and validation of one such approach, dynamic risk assessment, using data from the BP Texas City refinery incident.Dynamic risk assessment is a novel approach which integrates Bayesian failure updating mechanism with the consequence assessment. The implementation of this methodology to the BP Texas City incident proves that the approach has the ability to learn from near misses, incident, past accidents and predict event occurrence likelihood in the next time interval.     

Synthesis of vinasse-dolomite nanocomposite biochar via a novel developed functionalization method to recover phosphate as a potential fertilizer substitute

• Nanocomposites were prepared by adding dolomite to vinasse at different ratio. • Textural and morphological features of adsorbents were studied in detail. • CCD based RSM was used for investigation of P ion removal by nanocomposite. • The q_m based on Langmuir model for modified vinasse biochar was 178.57 mg/g. • P loaded nanocomposite improved plant growth and could be utilized as P-fertilizer. The effectiveness of phosphate (P) removal from aqueous solutions was investigated by novel low-cost biochars synthesized from vinasse and functionalized with calcined dolomite. The vinasse-derived biochar, synthesized via pyrolysis at different temperatures, showed easy preparation and a large surface area. The novel vinasse biochar nanocomposites were prepared by adding dolomite to the vinasse biochars with different weight percentages (10, 20 and 30%). The characteristics of the prepared materials were identified for further understanding of the inherent adsorption mechanism between P ions and vinasse biochars. Vinasse-dolomite nanocomposite was very effective in the adsorption of P species from aqueous media. The effect of the operational factors on Vinasse-dolomite nanocomposite was explored by applying response surface methodology (RSM). According to RSM results, the optimum condition was achieved to be contact time 90 (min), 250 (mg/L) of P concentration and pH 7. Thermodynamic isotherm and kinetic studies were applied on experimental data to understand the adsorption behavior. The Vinasse-dolomite nanocomposite revealed preferential P species adsorption in the presence of co-existing anions. The P species could be recovered by 1.0 M HCl where the efficiency was not affected up to the fifth cycle. The P-loaded Vinasse-dolomite nanocomposite was successfully tested on a plant; it significantly improved its growth and proved its potency as a P-based fertilizer substitute.     

Statistical source identification of major and trace elements in groundwater downward the tailings dam of Miduk Copper Complex, Kerman, Iran

Identifying the possible sources of potential harmful metals in groundwater systems plays a crucial role in evaluating the potential risks to residents and local plant cover. An attempt was made to define the origin of Al, Cd, Cu, Fe, Mo, Ni, and Pb in groundwater using multivariate statistic approaches [principal component analysis (PCA), hierarchical cluster analysis], and tailings sequential extraction by the method of Tessier et al. The concentrations of studied elements were measured in 42 samples collected from 15 stations surrounding and downward the tailings dam of Miduk Copper Complex, central province of Kerman, Iran. According to the PCA results, confirmed by cluster dendrogram and metal content measurement of tailings sequential extracts, two components accounting for nearly 73% of the total variance, controlled the heavy metal variability and classified the possible source of groundwater contamination into two categories: (1) upper seepage which controls the variability of Cd, Cu, Fe, Ni, and Pb and (2) toe seepage of tailings dump affecting on Mo and Al concentration in downstream groundwater.     

The pathway of dechlorination of PCB congener by a photochemical chain process in 2-propanol: the role of medium and quenching

As part of a program aimed at developing a field process for cleanup of PCB contaminated soils using photochemistry in basic 2-propanol, additional details of the dechlorination pathway are presented. The mechanism involves a chain reaction with both homolytic photochemical C-Cl bond fission and electron transfer steps producing PCB anion radicals. Kinetics of dechlorination of various congeners show patterns of relative rates associated with the basic 2-propanol medium that are not found in other media because both electron transfer and photochemical homolysis steps determine overall rates of dechlorination and govern the pathways and relative concentrations of intermediates. The electron transfer steps display opposite structure-reactivity correlations to the photo-homolysis, C-Cl bond fission steps. Oxygen quenching is shown to differentially affect both types of steps. In contrast to the suggestion that inter system crossing can be highly efficient with reaction originating from a PCB triplet, oxygen quenching data suggest that a significant minimum of the quantum yield is non-quenchable, presumably because of a reaction path from the PCB singlet. This may help to explain why exclusion of air is not entirely necessary in practice.